UL Listed Emergency LED Drivers with Test Switch and Indicator Light
This kind of Emergency battery backup has two parts, caontrol board and battery, which make size very smaller. It provides constant power output to the load during emergency mode operation.
Technical Parameters
Model Number |
EMBXXYY-ZZZ |
Input Power |
100mA Max. |
Input Voltage |
100-277VAC / 100-347VAC 50/60Hz |
Output Voltage |
25-50 VDC / 51-80 VDC / 81-155 VDC / 156-230 VDC |
Output Power |
6W |
Recharge Time |
24 Hours |
Discharge Time |
90 Minutes |
Battery |
Li-ion / Ni-MH |
Ambient Temp |
32°F~122°F/ 32°F~158°F |
Feathers
UL and cUL certificate
To reduce the risk of electrical shock, disconnect both normal and emergency source by turning off the A.C. branch circuit and by disconnecting the battery on/off connector.
Surge Protection
Including test switch and charge indicator accessory kit
Discharge Time: ≥1.5H
Applicable Fixtures
They are usually be used for led lights with internal driver and installed inside the fixture, such as LED Vapor Light, LED Linear Light, LED Stairwell Light, etc.
Certificate
Package
The products is packaged in individul box and outer cartons.
This product should be stored in its original package and kept in a clean and dry place.
The battery better be charged 24 hours every three months during storage.
Question & Answering
Q: How many kind of batteries in emergency power supply?
A: There are Li-Ion, LiFePO4, Ni-MH, and Ni-Cd, etc.
Q: How about the working temperature of Ni-MH?
A: Ni-MH: 0℃~70℃
Q: For AC wiring ones, How many power do you have?
A: There are 8W, 18W, 15W, 25W & 40W.
Q: What about the LiFePO4 and Li-ion?
A: LiFePO4 and Li-ion are both belong to Lithium battery. Most of their parameters are the same. LiFePO4's ambient temp is 32°F~140°F while Li-Ion is 32°F~122°F, But the size of LiFePO4 is much bigger than Li-ion's.
http://www.emergencyleddriver.com/